TECHNICAL DATA

Pressure vessel codes, PED, ASME, pvcALS™

Mechanical design pressure (g) / temperature

FG PED 1.6 MPa / 180°C *)

FG pvcALS™ 1.6 MPa / 180°C

FG ASME 150 psig / 350°F

FD PED 2.5 MPa / 180°C

FD ASME 300 psig / 350°F

*) Frame FG also approved for 1.2 MPa / 200oC to allow use in steam systems

without safety valves.

CONNECTIONS

FG PED Size 65 mm DIN 2501 PN16

FG pvcALS™ Size 65 mm DIN/GB/GOST PN16, JIS 16 K

FG ASME Size 3" ASME CI. 150

FD PED Size 65 mm DIN 2501 PN25

FD ASME Size 2½" ASME CI. 300

Maximum heat transfer surface

13 m2 (140 sq. ft)

Flow principle of a plate heat exchanger

Dimensions

Measurements mm (inch)

Type H W h

TS6-FG 704 (2723/32") 400 (16") 188 (713/32")

TS6-FD 704 (2723/32") 410 (161/8") 188 (713/32")

The number of tightening bolts may vary depending on pressure rating.

Particulars required for quotation

C Flow rates or heat load

C Temperature program

C Physical properties of liquids in question (if not water)

C Desired working pressure

C Maximum permitted